Bayseal CC Polar™
Bayseal CC Polar - closed cell spray-applied polyurethane foam insulation is a two component, HFC-245fa blown, medium density, structural system designed for commercial, industrial and residential insulation applications.
Extreme ambient air and substrate temperature will influence the chemical reaction of the two components, directly affecting the yield, adhesion and the resultant physical properties of the foam insulation. To obtain desired physical properties, Bayseal CC Polar system should be spray-applied to substrates when ambient air and surface temperatures are greater than 30ºF but less than 80ºF. All substrates to be sprayed must be free of dirt, soil, grease, oil and moisture prior to the application of Bayseal CC Polar system.
Recommended Uses:
· Ceilings Floors
· Vented Attics
· Piping
· Unvented Crawl Spaces Vented Crawl Spaces
· Foundations Concrete Slabs
· Ducts Tanks
· Cold Storage Freezers
· Coolers
Things to Consider, Thermal Barrier:
The Model Building Codes require that SPF be separated from the interior of a building by an approved fifteen (15) minute thermal barrier, such as 1/2" gypsum wall board or equivalent, installed per manufacturer’s instructions and corresponding code requirements. The Model Building Codes allow for omission of the prescribed thermal barrier in certain instances by way of diversified testing, such as:
• attics and crawlspaces with limited access.
• successful testing in accordance with room corner protocols.
Local building codes may vary and must be consulted for applicability of thermal barrier exceptions.
|